Welcome to the Jinrui Crane-Overhead Crane_Gantry Crane_Jib Crane Lifting Equipment Manufacturer The official website
返回列表
您当前的位置:Home > Technical data > Documents >
Wire rope electric hoist technical specification
Time:2017-09-28 16:21 The author:Jin Rui

Wire rope electric hoist


Wire rope electric hoist is a lifting equipment which widely used and necessary in Industry, it can be installed on single girder overhead crane,  single girder gantry crane, jib crane and I-beam. According to different design principles and using environments, Electric hoist also divide into single speed (CD wire rope electric hoist), double speed (MD wire rope electric hoist), square box (HC wire rope electric hoist) and curve traveling hoist(CDW electric hoist), anti-explosion type, metallurgical type, Europe type and Low headroom type, etc. What’s more, the electric hoist also can be designed to pendent control and wireless remote control.

Wire rope electric hoist technical specification

Item Specification
Capacity (ton) 0.25~32 or as required
Lifting height (m) 3~30 or as required
Lifting speed (m/min) 0.35/3.5, 0.7/7, 7, 0.8/8, 8 or as required
Travelling speed (m/min) 20/30 or as required
Wire rope type 6x37+1
Dia. 3.6/4.7/7.7/11/13/15.5/17.5/22.5/25.5
Working system FC=25%(Intermediate)
Power source 380V50Hz, 3-phase AC or as required

wire rope electric hoist

wire rope electric hoist

wire rope electric hoist

wire rope electric hoist


Last:European electric hoist technical specification
Next:Explosion proof electric hoist technical specification