Welcome to the Jinrui Crane-Overhead Crane_Gantry Crane_Jib Crane Lifting Equipment Manufacturer The official website
您当前的位置:Home > Technical data > Basic knowledge >
How to correctly install single girder gantry crane
Time:2017-09-28 11:58 The author:Jin Rui

How to correctly install single girder gantry crane

Single girder gantry crane is important heavy mechanical and electrical equipment tool, widely used to move horizontally or vertically, consist of lifting mechanism, running institutions and steel metal structures. These are general requirements for crane installation, as follow:
Before installation, fully grasp the single girder gantry crane performance and crane features, analyze and understand installation method and order, and strictly comply with them.
When single girder gantry crane install, please pay attention to the wind speed, wind speed must meet the design requirements, generally not exceeding 13m/s.
All single girder gantry crane parts are connected properly and reliably, lifting equipment and lifting slings must be checked strictly before use.
Follow wire rope use and installation requirements, cannot be hard, cage-bending distortion, loose, broken wires, bare core unit, and so on. Special multilayer non-rotating wire rope should be packed of the rollers around directly into the drum. If necessary cut off, make sure to prevent loose.
Single girder gantry Crane components must be installed in strict accordance with the design requirements, they must not cancel, substitute and add arbitrarily, any change should obtain technical personnel agreement before they execute.
After installation, gantry crane must be inspected properly.
Strictly comply with the gantry crane performance, must know clearly about manual lifting equipment, lifting capacity, parts quality, crane dimensions, lifting center of gravity height.
Before gantry crane lifting working , carefully inspect lifting equipment, lifting rigging. Load test should be carried out and confirmed safe.
gantry crane

gantry crane

Last:Overhead Crane Machine Considerations
Next:Overhead EOT Crane Safety Inspection Before Operation